Skip to main content

Blog entry by Clara Emerson

Be On The Lookout For: How Replacing A Window Handle Is Taking Over And What To Do About It

Be On The Lookout For: How Replacing A Window Handle Is Taking Over And What To Do About It

Window-Repairs.-150x150.jpgTips For Replacing a Window Handle

doorpanels-300x200.jpgThe replacement of the handle on your window is an easy project that can be completed from the comfort of your own home. Follow these guidelines to ensure an elegant and smooth finish.

Take off the screw covers from your uPVC handle to expose the screws. Then measure the spindle length to ensure that you receive the right size replacement.

1. Measure the Spindle Length

If you're replacing a window handle, it's crucial to determine the size of the spindle correct. This is because it could determine how tight or loose the handle is, and whether it will lock correctly within the window frame. The spindle is a metal shaft that connects the handle and to the lock within the window frame. The spindle is either a standard industry 8mm cross-section or the older 9mm versions. Modern industry standards are 8mm, however it wasn't always the case. It is important to check the measurements when buying a new handle.

Take the handle off. This is easily done by turning the handle to the open position, and unscrewing two screws that hold the handle in place (which are usually hidden behind plastic caps that will need to removed). After the handle is removed, measure the distance from the base to the point at which it ends. This will provide you with the measurements you need to buy a replacement.

There are many options available when it comes time to choose the perfect window handle. From sleek chrome that can fit into modern homes to traditional burnished bronze that looks great in restored Georgian rooms, or even the more classic Tudor cottages with curled mongoose-tail latches. There are many options, but the most important is to pick a style that matches your home.

Espag handles are typically used to uPVC window frames and are always the same size with a 43mm central. Cockspur handles vary from 58mm to 62mm but luckily there are replacements available for both sizes. Window handles from Cadenza are a different size again as they have an angled blade which operates with a multi-point locking mechanism within the window.

Another aspect to consider when selecting the best window handle is determining what hand you require to use, which is defined by what hand you use to open the front door handle Repair. Inline Espag handles can be used for left or right-handed windows. Cranked window handles are only used on windows that are open in one direction.

2. Remove the Handle

Whether the handle is damaged or just worn out or simply worn out, a window handle that is shattered can be very frustrating. The good part is that replacing a uPVC window handle is a simple task you can complete yourself. All you require is a few basic tools and a bit of time to complete the process.

You will need to first open the window, and make sure it's not locked. The next step is to remove the screws that hold the handle in position. Once the screw caps are removed you will be able to remove the handle.

The handle is attached to a spindle within the window frame. Depending on the kind the handle is held in place with a screw or pin. The most popular handles are the inline Espagnolette and cockspur handles. Both these types of handles are utilized on casement windows, which includes windows made of aluminium. They can be locked using keys to stop unauthorised opening of the window from the outside, or you can lock them by turning the handle clockwise.

To take the handle off, you'll need a flat blade screwdriver to remove the clip that holds the handle. Once the clip is released, the handle should slide off the spindle. After the handle has been removed, you will be required to measure the length of the spindle in order to ensure that your new handle is compatible with the spindle's length.

Once you've determined the proper size of the handle, screw it into the correct position. You must make sure that the new handle is firmly attached and that it turns in the correct way (clockwise for open or counterclockwise for closed). It is essential to make sure that the handle has not been placed upside down.

Then, you must replace the screw cover caps. After you've completed this step, you are able to test the handle to make sure it's functioning properly. It is also recommended to test the locking mechanism by moving the handle to the locked position and then back again.

3. Remove the Screws

A uPVC window handle is a crucial component of every home and is often the first item to exhibit signs of wear and wear and tear or damage. It can be caused by natural factors or through regular use and sometimes even intentional damage caused by criminals who might wish to open a locked window and gain access to your home. A simple replacement can solve the issue and stop it from occurring again.

UPVC handles can also be difficult to remove if the locking mechanisms aren't functioning correctly. In most cases, the issue can be solved by replacing the multipoint lock, rather than the entire handle, and it's worthwhile to check this out since it can save you money.

Once you've removed the old door handle repairs, you'll have to remove the screws fixing it to the base. These screws are usually located on the inside of the handle's base. You may require a screwdriver to accomplish this and it's crucial that you don't over tighten, as this could cause the handle to loosen.

The next step is to find the fixing screws or pins that hold the new handle in place. Again these are likely to be located on the inside face of the base of the handle and you'll need either a screwdriver or pair of pliers to remove the screws. After they've been removed, you'll be required to replace the caps on the screws in the event that you want to do so and test the new handle to make sure it's functioning properly.

When you're ready for installing the new handle, simply line up the spindle with the cut out in the window mechanism and screw it in the appropriate position. Make sure that the handle is in the open position and that the screws are tightly fixed before replacing the screw covers should you wish to do this. Once you've completed this, you're all done and you are able to enjoy your new window handle. I hope this will enable you avoid the need for expensive window and door handles repair near me replacements in the future. If you'd like to get assistance with this or any other aspect of your uPVC windows don't hesitate to get in touch with us.

4. Install the new handle

Whether you're replacing a broken handle or simply updating it the procedure is simple and can be completed in just a few steps. The key is to identify the kind of handle, take measurements of its spindle and know what tools you will need to complete the task. Always consider the safety of your windows and tools. It's also important to be patient and follow the steps with care to ensure that you have a functional handle that is safe to use.

The first step is to identify the screws that hold your current window handle in place. Then, remove these, whilst keeping an appropriate grip on the handle to prevent it from falling and result in injury. Once the screws are removed they can be repositioned in a secure location to be replaced in the future.

After you have removed the handle, you are now able to install your new one. It is crucial that the handle fits perfectly to ensure it works properly and locks the window in its place. The next step is to slide the square metal bar at the back of the handle into the hole in your window mechanism, making sure it is securely in place.

Once the new handle is in place, the final step is to replace the screw caps and check to see if it works. If you're not happy with the result or if the window does not open and close as it should then the next step is to call our experts who will be able to assist.

The majority of homes in the UK have repair upvc door handle windows, and as they are, a lot of them will have to be replaced due to damage or wear. Anyone with a bit of DIY expertise can accomplish the task. The most important aspect in the success of this procedure is ensuring that you're using a handle which matches your window's dimensions and style. If you're not sure about the kind of handle you'll require, please get in touch with our team who can guide you through the choices available.

  • Share

Reviews