Skip to main content

Blog entry by Fredrick Labbe

Guide To Automotive Key Repair: The Intermediate Guide To Automotive Key Repair

Guide To Automotive Key Repair: The Intermediate Guide To Automotive Key Repair

automotive Key Repair [lovebookmark.win] - What to Do When Your Car Key Won't Turn in the Ignition

We've all been there - your car key refuses to turn in the ignition. It could happen at the worst possible moment, for instance, when you are loading your car with groceries or heading home from work.

Instead of panicking instead, there are a variety of solutions to get back on the road. Here are some common automotive key repair problems and their possible solutions:

Broken or bent keys

A bent key is the most common reason a car owner can't start their vehicle. It can be repaired by simply straightening the key. This might seem easy however, you need to be careful. The key is extremely thin and could break if bent even a little.

To do this, you'll require a stable workspace, and an plier. Take the key on one end with the pliers and bend it until it is straight. This is best done on a flat surface, or in a vise. You can then place it into the lock to see if it changes.

If not, you may need to have a new key made. This will save you from needing to contact a locksmith and can ensure that your mobile key repair will function.

It's a good idea keep a spare key in your pocket, so you don't end up without a way into your vehicle in the event of a lost key.

If you're experiencing problems with a broken or bent key, try applying some grease on it prior to inserting it into the lock. This will make it easier to move through the cylinder and will prevent it from getting stuck. You can use graphite or spray lubricant. Make use of the plastic tube that comes with the spray to ensure a more precise application. This will also help to keep moisture from damaging your key.

Spring pins and springs with pins

A pin (also known as a roll pin or a spring) can get stuck. Pins are a small piece of metal that measures between 5.1 and 7.6 cm (2.5-3.0 in) long and has hollow ends. It is used to connect two parts of an equipment. In the majority of cases, you can remove a nut by pulling it off using your fingers or using a wrench.

If you own a brand new car that uses an electronic key with a microchip in it, there's a chance the key needs to be programmed in order to work with your vehicle. This procedure can differ based on the manufacturer and car.

If you need help with your automotive keys or locks, give us call! We can repair, replace or program almost any vehicle key.

Gear Selector

It's crucial to take your vehicle to a mechanic as quickly as you can when the gear selector is stuck in park. It's a safety concern, and you could cause serious damage to your vehicle if you continue to drive it. This could also be a sign that the transmission is experiencing more serious problems, which are costly to fix.

Luckily, most of the time this problem can be easily fixed. The most frequent reason the gear selector can get stuck is because one of the cable ends has snapped or become uncoupled from the lever itself. This is a simple fix and the mechanic can usually fix it within a few minutes.

In certain instances the gear selector bushing could get damaged or worn out. These are rubber covers that cover articulation points in the gear system to help it move more smoothly. They function in a similar way as cartilage in your knees therefore it is important to ensure that they stay in good shape and soft.

You can extend their life by doing a few simple things. You should first avoid using the gear selection in extremely cold weather. This is because the gear control cables are often prone to freezing and cracking. It is recommended to replace the bushings with premium quality ones, such as those from First Line.

These bushings are an essential part of your selection of gears and shouldn't be ignored. If you notice that yours is wearing out, it's a great idea to go to an auto shop that specializes in Land Rover repairs. They can assist you in finding the right parts to restore the gear selection system. They can also provide you with various other services, such as transmission service and maintenance.

Dead battery

If you turn your key in the ignition and you hear nothing but a click, then your battery is dead. As batteries age, they go through a natural process which causes them to die early. This is due to the negative plates inside the battery of your car will begin to be coated with crystals of sulfate.

A dead battery could cause your vehicle to lose electrical power, which could cause the radio to stop working or electric window malfunctioning. If your car is having problems beginning in cold weather, it is a good sign that it's time for an upgrade to your battery.

Sometimes, your issue might not be caused by a dead battery, but rather an issue with the charging system of your vehicle. This issue can be fixed by having your mechanic verify that the alternator, serpentine belt and battery cables are all functioning properly.

Another common automotive key repair is an ignition key that has stopped functioning properly. The key fob is a tiny unit that connects to the computer in the vehicle and relays signals and commands between the engine and accessory systems. This system can be confused or stop communicating if it gets wet or exposed to extreme temperatures.

Follow the steps in your owner's guide to reset the keyfob that was lost. Depending on the model of your car it may be necessary to open and close the doors, turn lights and other electronic devices off and on by pressing a specific sequence of buttons, or close and open the windows. If this doesn't fix your fob, it might need to be professionally programmed and will require an expert technician. It's worth trying these simple techniques before purchasing the new fob.

Ignition socket

Modern car remote key fob repair keys are fitted with a transponder, which, when inserted into the ignition, sends out an indication. This signal informs the immobilizer inside the car if the key is the right one for it to start. In the 1990s theft of vehicles became such an issue that the majority of manufacturers fitted this transponder security system in their vehicles to ensure safety and insurance purposes.

If you have a newer vehicle, the only option to replace your keys could be at the dealership or by calling the manufacturer directly. Write down the VIN (vehicle ID number) of your vehicle before you go. You can find this number on the dashboard, in the door jamb, or in the owner's manual.

Porsche-New-2023.pngBring your current key to a participating AutoZone store and a representative will use machines to trace the contours of your blank key to precisely replicate the original key. They will then cut the new key with an exact cutting machine on site. If your key is equipped with blade, fob or a large grey/black head it must be programmed for your vehicle before you can start the motor.

  • Share

Reviews