Skip to main content

Blog entry by Laurence Oswald

Guide To Double Glazing Windows Repairs: The Intermediate Guide On Double Glazing Windows Repairs

Guide To Double Glazing Windows Repairs: The Intermediate Guide On Double Glazing Windows Repairs

doorpanels-300x200.jpgDouble Glazing Windows Repairs

Double glazing refers to the panes of glass in the frame of a window or wall opening. This window glazing can be damaged at times and requires repairs.

If you've noticed condensation between the windows or a noticeable draught, or hinges or handles are becoming difficult to open, these are all signs that your double glazing needs to be fixed. This repair upvc windows typically involves a reseal on the entire unit.

Broken Panes

Double-glazed windows consist of two glass panes with an air space between them that is filled with inert gasses like argon and krypton. This keeps the heat inside your home, while also preventing cold drafts and moisture from getting in. Sometimes, windows can be damaged, and the entire window will need to be replaced. If you notice cracks or chips in the window, it is essential to contact the company that sold you the double glazing as soon as you can inform them of the issue and inquire for upvc door repairs near me.

It is possible to fix a broken pane of glass with just a few steps, but it's not recommended unless you have previous experience in DIY. First, you will require gloves and carefully remove the damaged pane. If it's cracked, press strips of masking tape over the areas that are cracked in a crisscross pattern. This will prevent the cracks from becoming worse over time, especially during the winter. It is also a good idea to cover the work area with newspaper in case any broken pieces fall off. After the broken pane is removed, use a putty blade to scrape off any glazing putty or glazed window seal. Remove the glazing points by using pliers. Then, apply an adhesive that quickly dries to apply a coat of primer on the wooden surface.

Measure the length and the width of the grooved channels with a tape. Subtract 1/8" from both measurements to allow for the slight movement of the replacement pane. Then, you can roll a thin rope of glazing compound into the grooved channels and then slide the glass into place. Tap the glass gently with a hammer every 6" or 8" to help it set in place. Be careful not to break it.

If you have a double-glazing warranty it is often worthwhile to try using this in order to avoid the expense of a replacement window. The warranty typically covers the cost of any part that you might require replacement or repair, as well as the cost of labor. It is essential to verify the specifics of your warranty because it may differ from one company to the next, so make sure you understand the coverage and when.

Foggy Glass

Foggy glass is often caused by condensation that occurs between the panes of your double-glazing. It could be caused by a variety factors, including variations in temperature, especially if the frames aren't installed correctly, and even ageing of the seals themselves.

The good news is that in the majority of instances, this can be repaired easily by a skilled double glazing installer. It is essential to contact the company who installed your windows immediately if you notice any issue, and write a note. It will be easier to contact the company if you have to later. This is also helpful in the event that your warranty or guarantee covers the issue.

The most effective way to stop the fogging is to replace the gasket seals. This can be done without the need to replace the entire window unit, and will help keep your home energy efficient. To do this, the window glazier will take off any clips or strips that hold the IGU in place and then cut through the old sealant using a saw.

Then, they'll build or buy an IGU replacement that fits the frame and apply special sealants to ensure that it's airand water-tight. When they're done with the installation, they'll put in retaining clips or strip them and apply more sealant.

If you're lucky, the misting could end after this. It is essential that your frames are properly ventilated to prevent the build-up of moisture in your ceilings or walls.

Double glazing owners may also notice that their windows and doors are difficult to open and close. This can be due to extreme weather conditions, or simply because the frame has sagged over time and is not flush with the rest your home. If this is the case, try wiping the frames with cold water to shrink the frames a bit, but it's unlikely to solve the issue completely. If you aren't able to solve the issue away, you may require replacement by an expert.

Condensation

Condensation occurs when the insulating gases in double-glazed windows fail to hold their position leaving air and moisture between the panes. This is a frequent issue in winter, when humidity levels are usually higher, though it can happen at other times of the year too. Moisture can cause mildew and mould to develop around window frames, sealants and sills. This is not only ugly, but also dangerous for your health. The good part is that condensation can often be sealed by a window expert to reduce the amount of moisture in your home and prevent moisture from accumulating.

Window sealing, also known as window gaskets, are a critical part of any double glazing window or upvc door repairs near me. Gaskets are used to seal the insulated space between your window glass to prevent drafts as well as heat, moisture, and drafts from entering or leaving your home. These gaskets may shrink or become brittle due to temperature fluctuations or weather conditions, as well as ageing. You might notice condensation on double-glazed doors or windows.

This can be repaired however, it will require replacing the "sandwich" (thermo-pane and glass) inside your double-glazing window. It is recommended that, unless you have the right tools, you hire a professional to re-seal double-glazed window.

Another frequent issue is mist that forms between double-glazed windows. This is a difficult issue to fix. This is a sign that the factory vacuum seal has failed, and there is no way to get air into or out of the sandwich.

A professional will reseal the windows with the same method as they would for a condensation or fog problem. This will normally involve taking off the thermo-pane sandwich, spraying it with a cleaning solution and then sucking out the old sealant. It is crucial to measure the sandwich in terms of length, width and thickening. This will ensure that the new seal fits perfectly and that a new seal can be drawn.

This is a difficult task that requires tools not commonly found in DIY shops. It is recommended to delegate this job to professionals as incorrect seals could lead to mold and damp in your home. This can be costly and hazardous to your health.

Water Leaks

It's important to take action as soon as you notice water leaking from your double-glazed windows. A small leak can quickly turn into a big problem when not dealt with quickly.

Often times the window frame itself could be the culprit. Verify that the sill pan (the flat bottom portion of the window frame) is designed to drain water away from your home and not into the window frame itself. If you find that the sill pan is not set correctly or you see water in the wood, you should consult an expert in double-glazing repair.

A damaged window seal is another frequent reason for leaks. This can be due to the age of the seal or damage, or even weather. This is not an easy fix and should be left to experts.

A window seal that is damaged can let air in through the windows, which makes it less energy efficient. This allows cold air to enter your home in winter and hot gas to escape in the summer. This can lead you to costly cooling and heating costs.

The most simple solution is to apply a fresh layer of caulking. While it is possible for those with a few DIY abilities to do this on their own, it is usually much easier to let a double glazing specialist take care of it for you. This way, you'll get a guarantee and peace of mind that the job is done properly.

Certain double-glazed windows have warranties of up to 20 years. You should check with the company that sold you windows to determine the warranty they provide and for how long. You can avoid the expense of having to replace double-glazed windows in the future. If you have a warranty on your double-glazed windows, it is important that you make sure to report any issues as soon as possible. This can be done online or by calling the company directly. This information can be helpful if you need to use the warranty.

  • Share

Reviews